The ISAC β-NMR HomePage
| Introduction to β-NMR |
Publications |
Students Projects |
Contacts |
| Technical Information |
Data Acquistion |
Approved Experiments |
Internal Page |
| Related Links |
BNMR Wiki |
Data Analysis |
Photo Album |
|
|
Expert/PPGoutput
You can calculate the pulse duration by refering to Zaher's nifty convertor. Turn to this page to DOUBLE check the RF pulse duration after you have started a run.
Once you have started a run and this page has updated, it should give you the pulse duration, down below under "PSM pulse width (ms)" (circled in red). Note that you MUST set the "RF on time" under PPG2e to a little greater than the PSM pulse width. This RF on time defines the dwell time.
The other entries here should agree with what you have chosen on other pages...
The bottom part of this page is below
2nd part of page...
Page last modified: 07/23/09 02:46 by Andrew MacFarlane.